|Home||» Products||» Elcometer||» Holiday Detector Inspection Kit|
Holiday Detector Inspection Kit
- Packaging Details
- Elcometer 280 Pulsed DC Holiday Detector Gauge (Model T), 5m (16’) trailing signal return lead, battery pack (2 supplied with Model T), battery charger with mains cables (UK, EUR & US), stainless steel rolling spring holder (supplied with Model T only), 250mm (9.8”) probe extension shaft, shoulder strap and operating instructions - packed in a lightweight, rugged, wheeled transit case
- STANDARDS: AS 3894.1, ANSI/AWWA C203, ANSI/AWWA C214, ASTM D4787, ASTM D5162, ISO 2746, ISO 29601, JIS G 3491, JIS G 3492, NACE RP0274, NACE SP0188, NACE SP0490, NACE TM0186, NACE TM0384
As a Authorized dealer we are engaged in providing the broad assortment of Elcometer Digital Inspection Kits.
Pinhole & Holiday Detection
Premature corrosion of a substrate is usually due to a coating failure. A major cause is the presence of flaws in the finished coating, collectively referred to as porosity. One of the most obvious porosity issues would be pinholes - where the substrate is open to the elements through the pinhole. Pinholes are caused by air entrapment, which is then released from the surface, or by the entrapment of particulates (dust, sand etc.) which do not stay in place. Pinhole detection is therefore essential to monitor the integrity of the protective coating from its initial application, throughout its service life.
Holiday test is used to detect holes, known as holidays or discontinuities, in a coating. Holiday testing allows the detection of even smallest coating flaws invisible to the naked eye. There are various techniques and equipment available for holiday detection.
Elcometer 280 Pulsed DC Holiday Detector Inspection Kit
The Elcometer 280 is a holiday detector which has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before.
Using state of the art electronics, the Elcometer 280 allows users to inspect coatings - without connecting the earth return lead to the component substrate - ideal for inspecting large surfaces and pipelines.
The Elcometer 280 uses the high voltage pulsed DC technique to detect holidays in coatings - even if the coating is damp, dirty or slightly conductive.
From the two stage safety switch, bright LEDs and screen icons signifying when the high voltage is on, to the extended ribbing to protect the user from spark creep, the Elcometer 280 sets the standard for high voltage measurement safety.