Elcometer 456 Coating Thickness Gage Probe Elcometer 456 Coating Thickness Gage Probe

Elcometer 456 Coating Thickness Gage Probe

उत्पाद विवरण:

X

उत्पाद विवरण

As a Authorized dealer we are engaged in providing the broad assortment of Elcometer, UK make Dry Film Coating Thickness (DFT) gauge used to measure the thickness of dry film coating, this gauge is well known in worldwide.

All Elcometer 456 probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Ferrous probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 ferrous gauges accept any ferrous probe. Non-ferrous probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe. Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes.

Unless stated, Elcometer separate probes have a maximum operating temperature of 150°F), PINIP probes have a maximum operating temperature of 80°C (176 °F).

Every Elcometer 456 gauge and separate probe is supplied with a Test प्रमाणपत्र free of charge. For separate gauges, the test measurements are generated using factory reference probes.

Feature 

  • All Elcometer 456 probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application
  • Straight Measures coatings on both flat and curved surfaces
  • Mini Probes - Ideal for measuring coatings on edges, narrow pipes or small surface areas
  • Right Angle Probes For taking readings where access is restricted
  • PINIP Probes Plug-in probes convert a separate gauge into an integral gauge
  • Telescopic Probes Extending right angle probes for out of reach areas
  • Ultra/Scan Probes - These probes are fitted with replaceable probe caps - allowing users to take individual readings or scan large surface areas without damaging the probe
  • Waterproof Probes Sealed for use underwater at depth, even in diving gloves
  • High Temperature Probes For use on hot coated materials up to 250‚°C (480‚°F)
  • Anodiser Probes Chemical resistant washable probes - ideal for the anodising environment
  • Armoured Probes Probes with metal reinforced heavy duty cables, reducing the risk of cable damage
  • Soft Coating Probes  Large surface area probes for soft reach materials (HVCA approved)
 All Elcometer probes are supplied with a test certificate and a set of calibration foils appropriate to the scale range of the probe.
  •  Ferrous probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 ferrous gauges accept any ferrous probe. Non-ferrous probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe. Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF gauges accept all ferrous, non-ferrous and dual FNF probes. 
  • Specialist Probes - These probes are designed for measuring on specialist substrates, such as graphite, or electroplated components
क्रय आवश्यकता विवरण दर्ज करें
ईमेल आईडी
मोबाइल नंबर


Back to top
trade india member
APAN ENTERPRISE सर्वाधिकार सुरक्षित.(उपयोग की शर्तें)
इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित