|Home||» Products||» Coating Inspection||» Coating Thickness Gauge with Ultra Scan Probe|
Coating Thickness Gauge with Ultra Scan Probe
As a Authorized dealer we are engaged in providing the broad assortment of Elcometer, UK make Dry Film Coating Thickness (DFT) gauge used to measure the thickness of dry film coating, this gauge is well known in worldwide. Elcometer 456 Coating Thickness Gauge Ultra/Scan Probe
Featuring a highly durable snap on replaceable probe cap, the Elcometer 456 Coating Thickness Gauge Ultra/Scan Probe is a revolutionary design which allows users to take individual dry film thickness readings or rapidly scan large surface areas - without damaging the probe or the coating.
When used in conjunction with the Elcometer 456 Coating Thickness Gauge Scan or Auto Repeat Modes*, the Ultra/Scan Probe enables users to significantly reduce dry film thickness inspection times without affecting accuracy.
The Ultra/Scan Probe uses the Elcometer 456 Coating Thickness Gaugeâ€™s patented offset feature+, ensuring that any cap wear during use# is incorporated within the calibration process. The coating thickness gauge even informs the user when to replace the cap.
When the Scan Mode is selected from the coating thickness gauge, users can slide the Ultra/Scan probe over the entire surface area. As the probe is lifted off the surface the gauge displays the average coating thickness value, the highest thickness and the lowest dry film thickness values. Each set of three dry film readings (average, high and low) can be displayed on the run graph and stored into the coating thickness gauge's memory.
During each scan, the Elcometer 456 coating thickness gauge displays the live thickness reading together with an analogue bar graph which graphically indicates the thickness relative to both the nominal thickness and any user-defined limits.
Auto Repeat Mode
When the Ultra/Scan Probe is slid over the coated surface in Auto Repeat Mode*, a coating thickness reading is taken approximately every half a second. Each individual dry film thickness reading is stored into the memory.
With a reading rate in excess of 140 readings per minute, the Auto Repeat Mode can significantly speed up the dry film thickness inspection of large coated areas.
Counted Average Mode
The Elcometer 456 Coating Thickness Gauge Model S and Model T are supplied with the Counted Average Mode. Once the user has defined the number of individual gauge readings to be taken within a spot measurement, the coating thickness gauge stores the average of the individual gauge readings into the memory.
Fixed Batch Sizes
The Fixed Batch Size feature within the Elcometer 456 Coating Thickness Gauge Model T allows users to define the maximum number of readings in each batch. Once the maximum number of readings has been reached the thickness gauge automatically opens up a new batch which is linked to the previous batch (name-1, name-2, etc.
- AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, BS 5599, DIN 50981, DIN 50984, ECCA T1, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2360, ISO 2808-6A, ISO 2808-6B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32